Three viewing presets
Choose Compact, Balanced or Upright, or move into Advanced controls for a custom angle.
QR CODE TABLE STAND
Create a tabletop QR stand for 3D printing
Build a self-supporting display around your QR with adjustable viewing angle and base depth. The Stand template is intended for counters, desks and tabletop placements where the code should face the scanner instead of lying flat.
The current generator runs in your browser. ScanSafe provides guidance, not a guarantee that every physical print will scan.
What you can do
Create a tabletop QR stand for 3D printing
Adjustable base depth
Tune the footprint of the stand to balance compactness and physical stability.
Full QR checks remain active
ScanSafe continues evaluating the QR while the object is displayed as a stand.
TABLETOP OBJECT CHECKLIST
Balance scan angle, footprint and physical stability
A table stand is not only a QR surface. Its angle and base depth affect how the code faces the user and whether the object stays stable when touched.
Choose the viewing angle for the placement
A low counter, desk and eye-level shelf can need different tilt choices.
Keep the QR face unobstructed
Avoid decorative geometry, lips or supports that enter the quiet zone or cast strong shadows across the code.
Check the footprint
A very shallow base may save material but can be less stable in real use.
Test from normal user distance
Scan from the position a customer or visitor will actually stand, not only from directly above the print.
How this workflow works
Angle the QR toward the scanner
A tabletop object is often easier to scan when the QR faces the user instead of pointing straight upward. The Stand template provides Compact, Balanced and Upright angle presets, with Balanced as the practical default for general tabletop use.
Balance footprint and presentation
Base depth affects how much table space the stand uses and how the geometry supports the display. Advanced controls let you tune the viewing angle and depth scale, while the live 3D preview makes the relationship visible before export.
Keep the QR itself within printable limits
Changing the stand does not remove the need for sufficient QR module size and feature depth. ScanSafe continues to evaluate the QR and current print profile so a visually attractive stand does not hide an undersized code.
QR CODE TABLE STAND
Try it in the 3D builder
Create QR table stand
Frequently asked questions
Which stand angle is recommended?
Balanced at 72 degrees is the current recommended starting point for general tabletop use.
Can I change the angle manually?
Yes. Advanced Stand controls allow a custom angle and base-depth adjustment.
Can the table stand use a Recessed QR?
Yes. The QR mode can be switched between Raised and Recessed while using the Stand template.